Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information and precautionary measures
   Search of causes of failures of electric equipment
   Safety locks - the general information
   Chain breakers
   The relay - the general information and check of serviceability of functioning
   Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
   Check of serviceability of functioning and replacement of understeering switches
   Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
   Check of serviceability of functioning and replacement of switches of the dashboard
   Check of serviceability of functioning of measuring instruments of a combination of devices
   Removal and installation of a combination of devices
   Removal and installation of the radio receiver and loudspeakers
   Removal and installation of the antenna of the radio receiver
   Replacement of lamps of head headlights
   Adjustment of the direction of optical axes of head headlights
   Replacement of block headlights
   Replacement of lamps
   Running fires of light time of day (DRL)
   Check of serviceability of functioning and replacement of an electric motor of the drive of screen wipers
   Check of serviceability of functioning and replacement of a horn of a horn
   Check of serviceability of functioning and recovery repair of a heater of back glass
   Control system of speed (tempostat) - general information and check of serviceability of functioning
   The electric drive of window regulators - general information and check of serviceability of functioning
   The uniform lock - general information and check of serviceability of functioning
   The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
   Safety cushions - the general information
   + Schemes of electric connections - the general information










Check of serviceability of functioning and replacement of a horn of a horn

Check

First of all always check a condition of a safety lock.


 PERFORMANCE ORDER

1. Disconnect an electrical wiring from a horn horn.
2. For check of serviceability of functioning of a horn give battery tension on one of its plugs. Ground the second plug (use wires crossing points). If the horn does not publish a sound signal, replace it.

3. At correct sounding of a horn check existence of tension on the horn socket at the squeezed-out button of management (see an accompanying illustration). If tension takes place, check a condition of grounding.

4. If tension is absent, check the relay (see the Relay - the general information and check of serviceability of functioning).
5. If the relay as it should be, check serviceability of giving of food for the power relay. Also check giving of food for a contour of management. At violation of giving of food in any of contours check a condition of an electrical wiring on a chain site between the relay and the assembly block of safety locks.
6. If tension regularly moves in contours of both relays, press the button of a horn and check conductivity of the switch for weight. In the absence of conductivity check a contour for break. If a chain as it should be, replace the horn switch.
7. In the absence of conductivity of the switch check for break and short circuit a chain on a site between the relay and the switch.

Replacement

 PERFORMANCE ORDER

1. For the purpose of ensuring access to a horn remove a loker of the left forward wheel (see the Head Kuzov).

2. Disunite electric sockets and turn out a bolt of a fixing arm (see an accompanying illustration).

3. Installation is made upside-down.