1. By means of an adhesive tape mark the provision of brushes of screen wipers on a car windshield. Give nuts of fastening of levers (leads) of screen wipers (see an accompanying illustration). Remove leads.
2. Take the central part of plastic clamps of fastening of the upper edge of a fairing, then release clamps (see an accompanying illustration).
3. Accurately remove clips of fastening of bottom edge of a fairing (see an illustration to paragraph 2). Remove the fairing panel from the car.
Hook the panel directly under clamps, trying not to tear a cowl sealant.
4. Installation is made upside-down. Do not forget to expose a brush of screen wipers according to the tags put in the course of dismantle.