Honda Tsivik + Cars of the Honda Civic and Acura Integra brand + Maintenance instruction + Routine maintenance + Engine + Cooling system and heating + Power supply system and release + Electric equipment of the engine + Control systems of the engine + gear shifting Box + Coupling and power shafts + Brake system + Suspension bracket and steering - Body Specifications Care of components of a body and bottom of the car Care of vinyl elements of finishing Care of an upholstery and carpets of salon Repair of insignificant damages of body panels Repair of seriously damaged body panels Service of loops and locks of the car Replacement wind and other fixed glasses Removal, installation and adjustment of provision of a cowl Removal and installation of a latch of the lock of a cowl and cable of its drive Removal and installation of assemblies of forward and back bumpers Removal and installation of forward wings Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back Removal, installation and adjustment of a door of a back Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment Removal, installation and adjustment of a cover of a luggage compartment Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank Removal and installation of an internal upholstery of doors Removal, installation and adjustment of provision of doors Removal and installation of latches and cylinders of locks and external and internal handles of doors Removal and installation of door glasses Removal and installation of the regulator of a window regulator Removal and installation of rear-view mirrors Removal and installation of the central console Removal and installation of the dashboard Removal and installation of a casing of a steering column Removal and installation of an instrument guard Removal and installation of a forward fairing Removal and installation of seats + Control body sizes + Onboard electric equipment
|
Removal and installation of the central console
|
Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of the Head Onboard electric equipment). |
|
1. Disconnect a negative wire from the battery.
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for input of the audio system in action! |
|
|
Back section of the console
|
|
1. Having hooked, remove a decorative cover and turn out lobbies of the screw of fastening of back section of the console (see an accompanying illustration). |
|
2a. Turn out the fixing screws located on both sides of back section of the console (see accompanying illustrations). |
|
2b. On some models for ensuring access to screws of fastening of back section of the console it is simpler to shift forward section forward. |
3. Pull the lever of the parking brake up. Remove back section of the console, having lifted it up and having handed over back. |
|
Forward section of the console
|
1. Remove the handle from the gear shifting lever (see the Head Korobk of gear shifting).
|
2a. Give screws of fastening of forward section of the console (see accompanying illustrations). |
|
2b. … and also along a first line. |
|
3. Having given fixture, pull back edge of section up and back and remove it via the gear shifting lever (See an accompanying illustration). Disconnect an electrical wiring and remove the console from the car. |
4. Installation is made upside-down. |
|
|
|