Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
   Removal, installation and adjustment of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of the regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment





Removal and installation of an internal upholstery of doors

Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of the Head Onboard electric equipment).

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for input of the audio system in action!


 PERFORMANCE ORDER

1. On models with the manual drive of window regulators remove the glass lowering/lifting handle (see an accompanying illustration).

2. Remove the internal handle of a door (see Removal and installation of latches and cylinders of locks and external and internal handles of doors).

3a. Turn out screws of fastening of the panel of an internal upholstery (see accompanying illustrations).

3b. Removal of an overlay of the handle of an armrest of a door.

3s. Reversing of the back screw of fastening of the handle of an armrest.

The 3D. Reversing of the forward screw of fastening of the handle of an armrest.

3e. Then, accurately hooking the clamps located on perimeter, separate the panel from a doorframe (see an accompanying illustration).

4. Slightly raise the panel and disunite electrical wiring sockets.
5. For the purpose of ensuring access to a door frame accurately hook clamps and remove the plastic insulating screen.
6. Return into place the plastic insulating screen. Before installation of the panel of an internal upholstery do not forget to make sure available on the places of all provided clamps (some from a bottom could drop out in the course of dismantle of the panel).
7. At the corresponding complete set restore initial connection of an electrical wiring of the uniform castle / drive of a window regulator. Press the panel to a door and accurately latch lateral clamps. Screw fixing screws. At the corresponding complete set establish into place assembly of the switch of the door lock. Install the handle of the manual drive of a window regulator.