Honda Tsivik + Cars of the Honda Civic and Acura Integra brand + Maintenance instruction + Routine maintenance + Engine + Cooling system and heating + Power supply system and release + Electric equipment of the engine + Control systems of the engine + gear shifting Box + Coupling and power shafts + Brake system + Suspension bracket and steering - Body Specifications Care of components of a body and bottom of the car Care of vinyl elements of finishing Care of an upholstery and carpets of salon Repair of insignificant damages of body panels Repair of seriously damaged body panels Service of loops and locks of the car Replacement wind and other fixed glasses Removal, installation and adjustment of provision of a cowl Removal and installation of a latch of the lock of a cowl and cable of its drive Removal and installation of assemblies of forward and back bumpers Removal and installation of forward wings Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back Removal, installation and adjustment of a door of a back Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment Removal, installation and adjustment of a cover of a luggage compartment Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank Removal and installation of an internal upholstery of doors Removal, installation and adjustment of provision of doors Removal and installation of latches and cylinders of locks and external and internal handles of doors Removal and installation of door glasses Removal and installation of the regulator of a window regulator Removal and installation of rear-view mirrors Removal and installation of the central console Removal and installation of the dashboard Removal and installation of a casing of a steering column Removal and installation of an instrument guard Removal and installation of a forward fairing Removal and installation of seats + Control body sizes + Onboard electric equipment
|
Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
Lock latch
|
1. Open a cover of a luggage compartment and lead round a marker a latch of its lock for the purpose of simplification of procedure of installation it into place.
|
2. Give a bolt and a nut of fastening of a castle latch (see an accompanying illustration). |
|
3. Remove a latch and disconnect a driving cable and an electrical wiring (see an accompanying illustration). |
4. Installation is made upside-down. |
|
Lock cylinder
|
1. Open a luggage carrier. Through a special opening in a cover also disconnect a driving cable from the lock cylinder. 2. Turn the lock cylinder on 90 ° counterclockwise for the purpose of combination of lock uvulas of a clamp with reciprocal grooves. Having pulled the cylinder on itself, take it from a cover of a luggage compartment. 3. Installation is made upside-down. |
|
Cover emphasis
|
1. Lift a cover of a luggage compartment and reliably record it in open situation. 2. Having turned out two fixing bolts, otso edinit the top end of an emphasis. 3. Having hooked a small screw-driver, remove a decorative cover, then turn out a bolt of fastening of the lower end of an emphasis and remove the last from the car. 4. Installation is made upside-down. |
|
|
|