Honda Tsivik + Cars of the Honda Civic and Acura Integra brand + Maintenance instruction + Routine maintenance + Engine + Cooling system and heating + Power supply system and release + Electric equipment of the engine + Control systems of the engine + gear shifting Box + Coupling and power shafts + Brake system + Suspension bracket and steering - Body Specifications Care of components of a body and bottom of the car Care of vinyl elements of finishing Care of an upholstery and carpets of salon Repair of insignificant damages of body panels Repair of seriously damaged body panels Service of loops and locks of the car Replacement wind and other fixed glasses Removal, installation and adjustment of provision of a cowl Removal and installation of a latch of the lock of a cowl and cable of its drive Removal and installation of assemblies of forward and back bumpers Removal and installation of forward wings Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back Removal, installation and adjustment of a door of a back Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment Removal, installation and adjustment of a cover of a luggage compartment Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank Removal and installation of an internal upholstery of doors Removal, installation and adjustment of provision of doors Removal and installation of latches and cylinders of locks and external and internal handles of doors Removal and installation of door glasses Removal and installation of the regulator of a window regulator Removal and installation of rear-view mirrors Removal and installation of the central console Removal and installation of the dashboard Removal and installation of a casing of a steering column Removal and installation of an instrument guard Removal and installation of a forward fairing Removal and installation of seats + Control body sizes + Onboard electric equipment
|
Removal and installation of an instrument guard
|
Considered in the present manual of the car are equipped with safety cushions (SRS). When performing any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of the Head Onboard electric equipment). |
|
1. Disconnect a negative wire from the battery.
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for input of the audio system in action! |
2. Remove a steering wheel (see the Head Podvesk and a steering). 3. Remove the central console (see Removal and installation of the central console. 4. Remove facing of an instrument guard (see Removal and installation of the dashboard). 5. Remove a combination of devices (see the Head Onboard electric equipment). 6. Remove all sections of the dashboard (see Removal and installation of the dashboard). 7. Give fixture (nuts and bolts) of the assembly block of safety locks and the handle of an otpuskaniye of the lock of a cowl (see Removal and installation of a latch of the lock of a cowl and cable of its drive and the Head Onboard electric equipment).
|
8. Give fixing nuts and lower a steering column (see an accompanying illustration). |
|
9a. Turn out fixing screws. |
|
9b. Having hooked a screw-driver, release from the dashboard deflectors of air ducts (see accompanying illustrations). |
10. Having hooked a screw-driver, remove forward overlays of door thresholds.
|
11. Turn out lateral screws of fastening of assembly of an instrument guard (see an accompanying illustration). |
12. Remove the radio tape recorder (see the Head Onboard electric equipment) and assembly of management of a heater (see the Head of the Cooling system and heating).
|
13. Turn out the lower screws in the central part of an instrument guard (see an accompanying illustration). |
14. Turn out bolts of fastening of the upper edge of a guard to a partition of a motive compartment. 15. Pull a guard on yourself and disconnect from it all electrical wiring. 16. Through a steering column remove a guard from the car. 17. Installation is made upside-down. |
|
|
|