Replacement of protective covers of the steering mechanism
PERFORMANCE ORDER
1. Weaken nuts of fastening of the corresponding wheel. A car front also establish to Poddomkratta it on props. Remove a wheel. 2. Remove from a bar of steering draft a tip and its lock-nut (see Removal and installation of tips of steering drafts).
3. Have a bite bokorezam and remove bandage tapes of fastening of a rubber protective cover of the steering mechanism (see an accompanying illustration).
4. Before installation of a new cover wind the cut end of steering draft with an adhesive tape incidentally not to damage small sponges of a cover when landing it on draft. 5. Put on a new cover draft and pull it on a crater of the steering mechanism, having tracked correctness of landing of its sealing sponges in a reception flute. Fix a cover new bandage tapes. 6. Remove an adhesive tape and screw on a place a tip of steering draft (see Removal and installation of tips of steering drafts). 7. Establish into place a wheel. Lower the car on the earth and tighten wheel nuts with the demanded effort (see Specifications to the Head Routine maintenance).