Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
- Control systems of the engine
   Specifications
   System of onboard diagnostics (OBD) - the principle of functioning and codes of malfunctions
   Removal and PCM/ECM installation
   Check of serviceability of a state and replacement of the sensor of provision of a butterfly valve (TPS)
   Check of serviceability of a state and replacement of the sensor of absolute pressure in the pipeline (MAR)
   Check of serviceability of a state and replacement of the sensor of temperature of the soaked-up air (IAT)
   Check of serviceability of a state and replacement of the sensor of temperature of cooling liquid of the engine (eats)
   Check of serviceability of a state and replacement of the sensor of VMT/provision of a cranked shaft / situation of pistons in cylinders of the engine (TDC/CKP/CYP)
   Check of serviceability of a state and replacement of the sensor of fluctuations of a cranked shaft (CKF)
   Check of serviceability of a state and replacement of the detector of control of electric loadings (ELD)
   Check of serviceability of a state and replacement of the sensor switch of pressure in system of hydrostrengthening of a wheel (PSP)
   Check of serviceability of a state and replacement of the oxygen sensor (l-probe)
   Check of serviceability of a state and replacement of the sensor of a detonation
   Check of serviceability of a state and replacement of the sensor of speed of the movement of the car (VSS)
   System of stabilization of turns of idling - the general information, check of a state and replacement of the IAC valve
   Check of serviceability of a state and replacement of the thermosensitive valve of turns of fast idling (FIT)
   System of a perepuskaniye of the soaked-up air - the general information, check of a state and replacement of a diaphragm of the IAB valve
   System of the operated ventilation of a case (PCV)
   System of recirculation of the fulfilled gases (EGR) - the general information, check of a state and replacement of components
   System of catching of fuel evaporations (EVAP) - the general information, check of a state and replacement of components
   The catalytic converter - the general information, check of a state and replacement
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




The catalytic converter – the general information, check of a state and replacement

In order to avoid violation of the guarantee certificates extending on components of systems of decrease in toxicity of the fulfilled gases, make check and service of the catalytic converter in the conditions of a workshop of car service.

General information

The catalytic converter is a component of systems of decrease in toxicity of the fulfilled gases, is switched on in structure of system of release and serves for decrease in issue in the atmosphere of toxic components. On the cars considered in the present manual catalytic converters of two types are used. The ordinary oxidizing converter allows to lower the content in the fulfilled gases of hydrocarbons and monoxide of carbon. The three-functional catalytic converter in addition allows to reduce emission of nitrogen oxides (NOH).

Check

The diagnostic equipment for check of serviceability of a condition of the catalytic converter is expensive and the extremely difficult in operation. At emergence of suspicions on failure of the converter, drive away the car for check on car repair shop.

 PERFORMANCE ORDER

1. Every time when the car for any reason rises over the earth, examine the converter on existence of signs of mechanical damages, traces of leaks and development of corrosion. Check a condition of welded seams and reliability of a tightening of flange bolts of fastening of the device to sections of system of production of the fulfilled gases. The defective catalytic converter is subject to replacement.
2. Despite reliability of a design of the converter, there is rather high probability of its obstruction. The simplest way of check of passability of the converter is check with use of the vacuum gage:
   a) Connect the vacuum gage to the inlet pipeline;
   b) Having opened a butterfly valve, lift the frequency of rotation of the engine to 2000 rpm;
   c) Quickly dump gas;
   d) If passability of the converter is not broken, depression has to fall quickly no more than to 51 mm of mercury. concerning norm;
   e) If the measuring instrument does not register depression in 127 mm of mercury. either above, or quickly fluctuates round the highest value before returning to initial, therefore, passability of system of production of the fulfilled gases or the catalytic converter is broken.

Replacement

See the Head of the Power supply system and release.