Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and bottom of the car
   Care of vinyl elements of finishing
   Care of an upholstery and carpets of salon
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and locks of the car
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
   Removal, installation and adjustment of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of the regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and installation of the dashboard
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment




Care of components of a body and bottom of the car

It is necessary to remember that the main factor determining the selling cost of the second-hand car is the condition of its body. Procedures of care of body panels are extremely simple, but have to be carried out on a regular basis. Negligence to the smallest mechanical damages and defects of a paint and varnish covering can lead to fast development of corrosion and need of performance of expensive body repair. It is important to check also regularly a condition of the surfaces and details hidden from a look, such as arches of wheels, the lower part of partitions of a motive compartment, etc.

Basic procedure for care of a body of the car is its sink, preferably plentiful amount of water, given under pressure from a hose. Rather powerful stream easily softens and forces down the dried-up dirt and that is important, allows to avoid damage of a paint and varnish covering at friction about it separate grains of sand and other abrasive particles. Do not forget to wash out also arches of wheels and the bearing car bottom elements. Strangely enough, the best time for performance of a sink of elements of a suspension bracket and the bottom of the car is damp rainy weather when the most part of the accumulated mud deposits is washed away automatically during the movement. Try not to miss opportunities and, taking an opportunity, make external survey of the components located under the car.

Once a year, or through each 20 000 km (12 000 miles) of run it is necessary to make check of a condition of an anticorrosive covering of the bottom of the car. Previously it is necessary to subject the car bottom, including a motive compartment, steam cleaning during which multilayered oil deposits, sticky slime and dense dirt especially well are removed. If possibility of application of steam cleaning is absent, it is necessary to process by means of a brush surfaces one of a set of the solvents which are let out now which is subject to cleaning of components.

The last method should not be applied on cars which anticorrosive covering of the bottom has a wax basis.

Such annual survey of the car should be made before a winter season after a good soaking of mud and oil deposits in the conditions of the increased humidity, characteristic for an autumn season. The damaged anticorrosive covering has to be immediately restored. In an ideal, once a year it is necessary to make full anticorrosive processing of the car at which the protective structure downloads in a cavity of door panels, thresholds, box-shaped sections of the bearing body elements and other available volumes.

The last does not belong to the panels and sections subjected to full anticorrosive processing and sealed industrially.

Having completely washed away dirt from a paint and varnish covering, wipe surfaces of body panels soft suede, returning to polishing initial gloss. Processing of surfaces the polish containing wax provides additional protection of a paint and varnish covering against atmospheric actions and allows to restore locally lost polishing. Remember that tarnishing of a paint and varnish covering is most often connected with negligence to a regular wash of the car.

It is necessary to make wax polishing of body panels approximately time in half a year. Paint and varnish "metallic" coverings need special leaving with application of the special, not containing abrasives of polishes. Try to check regularly passability of drainage and air vents of body panels. Do not forget to wipe glass from time to time, by means of the special cleaning structures deleting a road film from their surface. Do not use for processing of glasses the polishes containing wax or means for care of the chromeplated finishing elements at all.