Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability with basic plugs
   Removal and installation of the top control lever of a forward suspension bracket
   Removal and installation of the lower control lever of a forward suspension bracket
   Removal and installation of a rotary fist and stupichny assembly
   Removal and installation of assembly of a forward nave with the wheel bearing
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of a bar of the back stabilizer of cross stability with basic plugs
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Removal of air from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment




Removal and installation of tips of steering drafts

Removal

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding wheel. A car front also establish to Poddomkratta it on props. Remove a wheel.

2a. Holding a draft tip from a provorachivaniye the second key, release a lock-nut.

2b. Turn off a nut so that there was an opportunity to put a tag of provision of a tip on open rounds of a carving of a bar (see accompanying illustrations).

3. Take the forelock and weaken a nut of a spherical finger of a tip. It is not necessary to remove a nut still finally.

4. By means of a stripper release a sharovy finger of a tip from the lever of assembly of a rotary fist (see an accompanying illustration). Remove a nut and separate draft from a fist.

5. Turn off and remove a tip from draft.

Installation

 PERFORMANCE ORDER

1. Screw on draft a new tip (to the landing tag put in the course of dismantle on bar carving rounds). Put a sharovy finger of a tip in the lever of a rotary fist. Do not tighten a tip lock-nut so far.
2. Screw a koronchaty nut of a spherical finger and tighten it with the demanded effort. Record a nut the new forelock.
3. Strongly tighten a tip lock-nut.
4. Establish a wheel, lower the car on the earth and tighten wheel nuts with the demanded effort (see Specifications to the Head Routine maintenance).
5. Drive away the car in a specialized workshop for check of corners of installation of forward wheels.