Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
- Electric equipment of the engine
   Specifications
   Start of the engine from the auxiliary power supply
   Check of a state and replacement of the battery
   Check of a state and replacement of wires of the battery
   System of ignition - the general information
   Check of functioning of system of ignition
   Check of a state and replacement of the coil of ignition
   Check of serviceability of functioning and replacement of the module of management of ignition (ICM)
   Removal and installation of the distributor of ignition
   Check of installation and adjustment of a corner of an advancing of ignition
   System of a charge - the general information and precautionary measures
   Check of a condition of system of a charge
   Removal and installation of the generator
   Replacement of the regulator of tension and brushes of the generator
   System of start - the general information and precautionary measures
   Check of serviceability of functioning of a starter on the car (in situ)
   Removal and installation of a starter
   Removal and installation of the traction relay
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Specifications

System of ignition

Ignition coil

Characteristic

Value

Civic (Hitachi distributor)

 

   Resistance of primary winding, Ohm

0.45÷0.55

   Resistance of a secondary winding, kOhm

22.4÷33.6

Civic (TES distributor)

   Resistance of primary winding, Ohm

0.63÷0.77

   Resistance of a secondary winding, kOhm

12.8÷19.2

Integra

   Resistance of primary winding, Ohm

0.6÷0.8

   Resistance of a secondary winding, kOhm

12.8÷19.2

Installation of a corner of an advancing of ignition

Characteristic

Value

Civic

 

   Models with RKPP D16Y5, D16Y8

12 ° ± 2 ° before VMT (Krasn.) at 450 ± 50 rpm

   D16Y7

      USA

12 ° ± 2 ° before VMT (Krasn.) at 670 ± 50 rpm

      Canada

12 ° ± 2 ° before VMT (Krasn.) at 750 ± 50 rpm

   Models with AT/CVT

      USA

12 ° ± 2 ° before VMT (Krasn.) at 700 ± 50 rpm

      Canada

12 ° ± 2 ° before VMT (Krasn.) at 750 ± 50 rpm

Integra

   B18B1, B18C1

16 ° ± 2 ° (Krasn.) at 750 ± 50 rpm

   B18C5

16 ° ± 2 ° (Krasn.) at 800 ± 50 rpm

System of a charge

Characteristic

Value

Minimum admissible length of brushes of the generator, mm

1.6