Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling system and heating
- Power supply system and release
   Specifications
   Dropping pressure in a power supply system
   Check of serviceability of functioning of the fuel pump/pressure of fuel
   Check of a state and replacement of fuel lines and their nipple connections
   Removal and installation of the fuel pump
   Check of a state and replacement of the sensor of fuel consumption
   Removal and installation of a fuel tank
   Cleaning and repair of a fuel tank - general information
   Removal and installation of assembly of the air cleaner
   Removal, installation and adjustment of a cable of an accelerator
   System of electronic injection of fuel (EFI) - the general information
   Check of serviceability of functioning of system of injection
   Removal and installation of the case of a throttle
   Removal and installation of the regulator of pressure of fuel
   Removal and installation of the fuel highway and injectors of fuel of injectors of fuel
   System of release - the general information
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Specifications

General parameters

Characteristic

Value

Fuel pressure (at single turns of the engine), kgf/cm2

 

   Civic

 

      With the connected vacuum hose of the regulator

2.0÷2.5

      With the disconnected vacuum hose of the regulator

2.7÷3.2

   Integra

      B18B1 engine

         With the connected vacuum hose of the regulator

2.2÷2.5

         With the disconnected vacuum hose of the regulator

2.8÷3.3

      The B18C1 engine for 1997 vyp.

         With the connected vacuum hose of the regulator

2.7÷3.2

         With the disconnected vacuum hose of the regulator

3.4÷3.9

      B18C1 engine

         With the connected vacuum hose of the regulator

2.7÷3.2

         With the disconnected vacuum hose of the regulator

3.3÷3.8

Resistance of an injector of injection of fuel, Ohm

   Civic

It is not stipulated (but should not be zero or infinite)

   Integra

      1994 and 1995

10÷13

      with 1996

It is not stipulated (but should not be zero or infinite)

Resistance of the fuel level sensor, Ohm

   Civic (the sensor is fixed by a nut)

      Full tank

3.5÷5.0

      Half the filled tank

25.5÷39.5

      Empty tank

105÷108

   Civic (the sensor is fixed by a lock ring)

      Full tank

2.0÷5.0

      Half the filled tank

25.5÷39.5

      Empty tank

105÷110

   Integra

      Full tank

2.0÷5.0

      Half the filled tank

29.5÷35.5

      Empty tank

105÷110

Efforts of a tightening of threaded connections, Nanometer

Characteristic

Value

Service bolt of an injector of injection

 

   Bolt on 6 mm

 

      Civic 1996

11.8

      Integra with 1994 on 1996

14.9

   Hollow bolt on 12 mm (all models)

34

Bolts/nut of fastening of the case of a throttle

 

   Integra 1994 and 1995

19.0

   All other models

22

Nuts of fastening of the fuel highway

12.2