Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of run or time in three months)
   Check of the ATF AT/CVT level (each 4 800 km of run or time in three months)
   Replacement of motive oil and oil filter (each 4 800 km of run or time in three months)
   Check of a state and replacement of brushes of screen wipers (each 12 000 km of run or time in 6 months)
   Check, service and charging of the battery (each 12 000 km of run or time in 6 months)
   Check of a state, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of run or time in 6 months)
   Check of a state and replacement of the hoses located in a motive compartment (each 12 000 km of run or times in 6 months)
   Check of a condition of components of the cooling system (each 12 000 km of run or time in 6 months)
   Rotation of wheels (each 12 000 km of run or time in 6 months)
   Check of brake system (each 12 000 km of run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of run or time in 12 months)
   Replacement of the filtering air cleaner element (each 24 000 km of run or times in two years)
   Check of a condition of components of a power supply system (each 24 000 km of run or time in 12 months)
   Check of level of the RKPP transmission oil (each 24 000 km of run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of run or times in 6 months)
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, a cover and the runner of the distributor (each 48 000 km of run or time in 24 months)
   Check and replacement of the valve of system of the operated ventilation of a case (PCV) (each 48 000 km of run or times in 24 months)
   Replacement of the fuel filter (each 48 000 km of run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of run or time in 24 months)
   Service of the cooling system (depletion, washing and filling) (each 48 000 km of run or time in 24 months)
   Replacement of brake fluid (each 48 000 km of run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of run or time in 24 months)
   Replacement of the RKPP transmission oil (each 48 000 km of run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts

The condition of components of a suspension bracket and the steering drive has to be made regularly as their wear or damage can be the reason of reduction of service life of tires, conduct to decrease in controllability of the car and increase of fuel consumption. Detailed illustrative material is presented also in the Head Podvesk and a steering.

Check of a condition of shock-absorbers

 PERFORMANCE ORDER

1. Park the car on an equal horizontal platform, whenever possible with a hard coating. Firmly cock the parking brake and check pressure of a rating of tires.
2. Press on one of car corners. At an otpuskaniye the body has to come back to a starting position, making no more than one-two fluctuations.
3. Rocking of a body at an otpuskaniye of a corner testifies to high probability of wear or weakening of the corresponding shock-absorber.
4. Repeat procedure with each of the remained car corners.
5. The car also establish to Poddomkratta it on props.

6. Attentively examine shock-absorbers on existence of signs of leak of liquid (see an accompanying illustration). Existence of a thin oil film should not cause concern. Without fail make sure that a source of leak is the shock-absorber, in case of need make replacement of shock-absorbers in a set (forward and back).

7. Check reliability of fastening of shock-absorbers on the support. In case of detection of defects replace shock-absorbers in a set.
8. The description of procedure of replacement of shock-absorbers is provided in the Head Podvesk and a steering.

Check of a condition of components of a suspension bracket and steering drive

 PERFORMANCE ORDER


A — Tips of steering drafts
B — the Lower spherical support
With — Plugs of forks of the lower support of shock-absorbers


A — Rubber plugs and elements of fixture of a bar of the stabilizer
B — Rubber plugs of the lower lever

1. Visually check components of a suspension bracket and the steering drive for existence of deformations and mechanical damages (see illustrations above).

2. Estimate a condition of sealing cuffs, protective covers and rubber plugs (see accompanying illustrations), try not to pass signs of development of leaks.
3. Clear the lower surface of a rotary fist of dirt traces ask the assistant to grasp bottom edge of a wheel and to pull it in the cross direction. Try to reveal visually a side play in spherical support of connection of a fist with a suspension bracket control lever. In the presence of a side play the worn-out hinge is subject to replacement.
4. Grasp forward and back edges of a wheel, press on forward and pull for the back. In case of identification of a side play in joints of components of the steering drive check a condition of the pendular lever and tips of steering drafts. Pass to other board of the car and repeat procedure, having pulled an opposite wheel.

More detailed information on a design of components of a suspension bracket is provided in the Head Podvesk and a steering.

Check of a condition of protective covers of power shafts

Established since both ends of each of power shafts corrugated rubber covers are urged to protect hinges of equal angular speeds (CV JOINTS) from the destructions connected with hit of dirt in them. Hit of oil and greasing on a surface of covers can lead to their premature destruction. It is expedient to wash out covers solution of soap water from time to time. In view of a constant flexure at turns of wheels, covers of external CV JOINTS wear out quicker and have to be checked more often and more regularly.

 PERFORMANCE ORDER

1. Attentively check covers for existence of cuts, cracks and other damages, estimate reliability of fixing them bandage tapes. In case of detection of defects, or greasing leak traces the damaged cover is subject to replacement (see the Head Stsepleniye and power shafts).