Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of run or time in three months)
   Check of the ATF AT/CVT level (each 4 800 km of run or time in three months)
   Replacement of motive oil and oil filter (each 4 800 km of run or time in three months)
   Check of a state and replacement of brushes of screen wipers (each 12 000 km of run or time in 6 months)
   Check, service and charging of the battery (each 12 000 km of run or time in 6 months)
   Check of a state, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of run or time in 6 months)
   Check of a state and replacement of the hoses located in a motive compartment (each 12 000 km of run or times in 6 months)
   Check of a condition of components of the cooling system (each 12 000 km of run or time in 6 months)
   Rotation of wheels (each 12 000 km of run or time in 6 months)
   Check of brake system (each 12 000 km of run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of run or time in 12 months)
   Replacement of the filtering air cleaner element (each 24 000 km of run or times in two years)
   Check of a condition of components of a power supply system (each 24 000 km of run or time in 12 months)
   Check of level of the RKPP transmission oil (each 24 000 km of run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of run or times in 6 months)
   Check of a state and replacement of spark plugs
   Check of a state and replacement of VV of candle wires, a cover and the runner of the distributor (each 48 000 km of run or time in 24 months)
   Check and replacement of the valve of system of the operated ventilation of a case (PCV) (each 48 000 km of run or times in 24 months)
   Replacement of the fuel filter (each 48 000 km of run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of run or time in 24 months)
   Service of the cooling system (depletion, washing and filling) (each 48 000 km of run or time in 24 months)
   Replacement of brake fluid (each 48 000 km of run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of run or time in 24 months)
   Replacement of the RKPP transmission oil (each 48 000 km of run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Check of level of the RKPP transmission oil (each 24 000 km of run or time in 12 months)

 PERFORMANCE ORDER

1. The case RKPP is not equipped with the measuring probe. Level of transmission oil in a transmission is checked by a reversing of a control/jellied stopper from a case sidewall (see an accompanying illustration). Find a stopper on the right side of RKPP and carefully wipe it and the case surface surrounding it pure rags. Turn out a stopper – the level of transmission oil in a case has to reach the lower cut of a control/jellied opening, otherwise it is necessary to make the corresponding adjustment. If the car is lifted for ensuring access to RKPP case before getting under it make sure of reliability of fastening of props.


The car has to be installed strictly horizontally.


2a. In case of need, through the same opening add necessary amount of oil of the demanded grade in RKPP case – use a funnel (see accompanying illustrations).

2b. Level can be considered brought to norm when oil starts following a thin stream from an opening.

3. Screw a stopper on a place and strongly tighten it. Make short trial runs of the car after which make sure of lack of leak of oil through a stopper.