Honda Civic/Acura Integra

since 1994 release

Repair and operation of the car



Honda Tsivik
+ Cars of the Honda Civic and Acura Integra brand
- Maintenance instruction
   Arrangement and functions of governing bodies
   Keys and locks
   Adjustment of seats
   The equipment and governing bodies in salon
   Heater and air conditioner
   Control system of a microclimate of salon
   Audio system
   Security systems
   Running in of the new car
   Unlocking of a cowl
   The valve of shutdown of supply of fuel in case of accident (on some models)
   Start of the engine
   Five-step manual box of gear shifting
   Automatic transmission
   Besstupenchaty variator (separate models)
   Devices of external lighting and alarm system of the trailer
   Check of level of liquid in automatic transmission
   Driving belts
   Emergency closing of the panel of the hatch of a roof
   Safety locks
+ Routine maintenance
+ Engine
+ Cooling system and heating
+ Power supply system and release
+ Electric equipment of the engine
+ Control systems of the engine
+ gear shifting Box
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




Heater and air conditioner

At the correct use of opportunities of system of heating and ventilation of your car in salon comfortable conditions of dwelling are provided and fogging of glasses is excluded.

If your car upon purchase was not equipped with the air conditioning system. You can install this system on the car at any time. For this purpose it is necessary to address on HUNDRED Honda for equipment of the car the central air made at Honda plants and meeting all requirements of our company.

Control panel heating, ventilation and air conditioning

Fan regulator handle


Movement of the handle leads to increase in frequency of rotation of the fan and air supply in salon of the car to the right.

Air temperature regulator handle

Movement of the handle leads to increase in air temperature, the car coming to salon to the right.

Button of turning on of the conditioner of air (separate models)

The А/С button is intended for inclusion and switching off of the conditioner of air. At the switched-on conditioner the indicator which is built in the button lights up.

Button of inclusion of the mode of recirculation of air
The button is intended for inclusion and switching off of the mode of recirculation of air.

At the included recirculation mode (to what the burning indicator which is built in the button testifies) the salon of the car is isolated from the atmosphere and receipt in salon of fresh air stops. The fan provides air circulation on the closed contour. If repeatedly to press the button and to switch off the recirculation mode (thus the indicator which is built in the button will go out), fresh external air from the atmosphere will start coming to salon.

Buttons of inclusion of the modes of distribution of air

Buttons are intended for an air distribution mode choice.

External air comes to salon via the central and lateral ventilating deflectors located in the control panel.


External air comes to salon at the same time via the central and lateral ventilating deflectors in control panels and the lower ventilating nozzles which provide air supply in a zone of an arrangement of feet of the driver and passengers.

External air comes to salon only through the lower ventilating nozzles which provide air supply in a zone of an arrangement of feet of the driver and passengers.

External air comes to salon at the same time through nozzles of an obduv wind and lateral glasses, the control panels located on the top shelf, and through the lower ventilating nozzles.

External air arrives on having blown wind and lateral glasses through the nozzles located on the top shelf of the control panel.

CARS WITH A 5-DOOR BODY THE HATCHBACK

Control of deflectors


You can adjust the direction of the streams of air coming to salon from deflectors by means of regulators. Direct air in the desirable direction, moving rychazhka of deflectors to the left-to the right and up-down.

Air supply via the lateral ventilating deflectors located at the left and on the right on the control panel can be completely stopped. To close or open the lateral ventilating deflector, turn the regulator which is located sideways from the deflector.


The deflector located on the top shelf of the control panel can be open or closed with the help a rychazhka which is between the central ventilating deflectors.


If one of the modes of distribution of air is included or, in the top situation the rychazhka air will come to salon of the car at the same time through central and top ventilating deflectors. To stop intake of air via the top deflector, completely lower a rychazhok down.

Recommendations about operation of a heater and conditioner of air

For functioning of systems of heating of salon and air conditioning it is required that the engine of the car worked. The heater uses hot cooling liquid of the engine for heating of the air coming to salon. If the engine is not heated-up up to the normal working temperature, some minutes before warm air starts coming to salon will be required.

In absolute majority of cases the best results of work of the systems providing a comfortable microclimate are reached in the receipt mode in salon of external air. Long inclusion of the mode of recirculation of air, especially at the idle conditioner, leads to fogging of glasses. Therefore it is recommended to include the air recirculation mode only in case of need and for short time, for example, at the movement on the district with the filled with smoke or polluted atmosphere. As soon as need of isolation of salon of the car from the atmosphere disappeared, switch off the air recirculation mode.

External atmospheric air comes to systems of heating and conditioning through the reception lattice located before a windshield. Periodically clear openings of a reception lattice of leaves and the other garbage complicating air passing.

Ventilation of salon of the car

The system of a supply and exhaust ventilation provides a constant exchange of air in salon of the car. The fresh external air arriving through a forward reception lattice circulates on salon and then is removed through the exhaust outlets located about back glass.

 PERFORMANCE ORDER

1. Shift temperature regulator handle in extreme left situation. Check that the conditioner of air was switched off.
2. Include the air distribution mode, having pressed the corresponding button. The mode of recirculation of air has to be switched off.
3. By means of the handle of the regulator of the fan establish the desirable level of air supply in salon.

Cooling of air in salon of the car (separate models)

 PERFORMANCE ORDER

1. Turn on the air conditioner, having pressed the corresponding button. Thus the light indicator which is built in the button has to light up.
2. Check that the handle of the regulator of air temperature was in extreme left situation.
3. Include the air distribution mode, having pressed the corresponding button. The mode of recirculation of air has to be switched off.
4. By means of the handle of the regulator of the fan establish the desirable level of air supply in salon.

If the car staid a long time on the sun, and air in salon strongly heated up, you can reduce quickly air temperature in salon as follows.

 PERFORMANCE ORDER

1. Start the engine.
2. Turn on the air conditioner, having pressed the corresponding button. Check that the handle of the regulator of air temperature was in extreme left situation.
3. By means of the handle of the regulator of the fan establish the maximum air supply in salon.
4. Slightly open windows and include the air distribution mode, having pressed the corresponding button. The mode of recirculation of air has to be switched off. After air temperature in salon decreases to the acceptable level, close windows and set the normal mode of air conditioning as it is described above.

Operation of the air conditioning system leads to additional load of the car engine. Therefore watch closely an arrow of the index of temperature of cooling liquid, moving with a small speed in street traffic jams or overcoming long raising of the considerable steepness. If the arrow was displaced to a red zone of a scale, temporarily switch off the air conditioner until temperature of the engine does not return to normal.

Heating of salon of the car

To lift air temperature in salon of the car, execute the following.

 PERFORMANCE ORDER

1. Start the engine.
2. Include the air distribution mode, having pressed the corresponding button. The mode of recirculation of air has to be switched off.
3. By means of the handle of the regulator of the fan establish the desirable level of air supply in salon.
4. Moving the handle of the regulator of air temperature establish desirable degree of heating of the air coming to salon.

Heating of salon with simultaneous drainage of air (separate models)

During the work of central air humidity of air decreases. Therefore simultaneous inclusion of a heater and the conditioner allows to make air in salon of the car warm and dry.

 PERFORMANCE ORDER

1. Turn on the fan.
2. Turn on the air conditioner.
3. Include the air distribution mode, having pressed the corresponding button. The mode of recirculation of air has to be switched off.
4. Moving the handle of the regulator of air temperature establish desirable degree of heating of the air coming to salon. In this mode cold air from the conditioner mixes up with warm air from a heater.

Joint inclusion of systems of heating and air conditioning can be applied in any traffic conditions when temperature of air is above 0 °C.

Removal of moisture and hoarfrost from glasses

It is possible to clear internal surfaces of glasses of the condensed moisture as follows.

 PERFORMANCE ORDER

1. Turn on the fan.
2. Turn on the air conditioner (on some modifications of the car).
3. Include the mode of an obduv of glasses, having pressed the corresponding button. The mode of recirculation of air has to be switched off.
4. Moving the handle of the regulator of air temperature establish desirable degree of heating of the air arriving on having blown in glasses.
5. Include an electric heater of back glass for faster removal of the condensed moisture from its surface.

To remove the hoarfrost or ice formed after the parking of the car on the street in frosty weather from an external surface of glasses, execute the following.

 PERFORMANCE ORDER

1. Start the car engine.
2. Include the mode of an obduv of glasses, having pressed the corresponding button. The mode of recirculation of air has to be switched off.
3. Move the air temperature regulator handle to extreme right situation (the maximum heating of air) and turn on the fan on the maximum air supply.
For acceleration of cleaning of a windshield of hoarfrost or ice it is recommended to include the air recirculation mode in very cold weather at first. After the windshield was cleared of hoarfrost or ice, switch off the air recirculation mode to prevent fogging of glasses.

In the mode of an obduv of glasses all air comes to salon through the slot-hole nozzles located on the top shelf of the control panel at the windshield basis and via lateral ventilating deflectors which are at the edges of the control panel. Air temperature, the blowing glass, and the speed of purification of glasses increase in process of warming up of the engine. For faster removal from a windshield of condensate, hoarfrost or ice you can close lateral ventilating deflectors, having turned the corresponding regulators down. In this case all air will go only on having blown in a windshield.

For reasons of safety do not begin the movement until all windows are not cleared of condensate, hoarfrost or ice and the good review from the car will not be provided to you.

Switching off of systems of heating and ventilation

Temporarily to disconnect systems of heating and ventilation, move to extreme left position of the handle of regulators of the fan and air temperature.
Shutdown of system of heating is necessary the first some minutes after start of the engine in cold weather. It provides faster warming up of the engine up to the temperature sufficient for effective work of a heater. Keep the fan in all other cases constantly included in order to avoid a congestion in salon of a dead air.